What precautions should be taken for a relatively large horizontal wrapping machine?

The horizontal wrapping machine is a larger type of equipment among wrapping machines. Its working principle is very different from that of a pallet wrapping machine. Due to its larger size, it is necessary to pay more attention to safety issues whether it is placed or used. In summary, there are several points.

Three key points for storing horizontal wrapping machines:

1. Do not open the door of the protective cover during the operation of the equipment. Since the working principle of the horizontal wrapping machine is that the mold frame drives the film roll to rotate around the object to achieve packaging, it is easy to cause certain dangers during the operation process, so protective covers are installed around the equipment. The function of the protective cover is to ensure safety during work. Therefore, when using the equipment, the user should not open the door of the protective cover without stopping the equipment.

2. Strictly follow the operating procedures. After the user has used the equipment for a period of time, the operating process problems are often ignored, causing a certain degree of safety hazards. Therefore, we emphasize that when using the equipment, the equipment must be operated strictly in accordance with the operating procedures to avoid unnecessary dangers.

3. Ensure the safety of the equipment's power connection. Due to the large size of the horizontal wrapping machine, it needs to be placed in a relatively open area, which may cause obstacles to power connection. However, no matter what difficulties exist, the safety of power connection should be taken seriously to ensure the effective access of the power supply, and at the same time, it is necessary to ensure that there are no safety hazards of the power supply during the operation of the equipment.

Four precautions for the use of horizontal wrapping machines:

1. When the horizontal wrapping machine is in the initial position, fix the film on the turntable or the goods and press the automatic operation button

2. The turntable starts to accelerate to high speed, and the film is automatically output with the turntable. At the same time, the turntable counts. When the value set at the bottom layer is reached, the mold frame starts to rise

3. When the film frame rises to the point where the photoelectric switch cannot irradiate the goods, the film frame stops rising after the set time, and the up and down times are counted once. The turntable continues to run and counts. When the set top layer number of turns is reached, the film frame descends. When it descends to the bottom, the film frame stops, and the up and down times are counted again, and the bottom layer number of turns is counted

4. By analogy, the packaging process is completed when the up and down times reach the set value of the horizontal wrapping machine. The turntable slowly descends and stops at the initial detection point.